BARTON Leather NATO Style watch bands are custom fabricated from top grain leather and 316L surgical grade stainless. These straps have been designed to meet the highest standard of fashion, function and fit and we back it up with a full satisfaction guarantee. Buy multiple bands to compliment your wardrobe and swap in seconds. Selecting Width: Straps are available in 18mm, 20mm, 22mm and 24mm widths. To determine the proper width for your watch, use a metric ruler to measure the 'lug width' (the point on the watch head where the band attaches). Lug widths for most common watches are also available from the manufacturer online. Selecting and Adjusting Length: All widths (18mm, 20mm or 22mm) of our original 'Standard' length band measure approximately 10-inches in total length and fit wrists from 5" to 7 1/2" in circumference. All widths (20mm, 22mm and 24mm) of our 'Long' version measure 11-inches in total length and fit wrists from 6" to 8 1/2". However, watch size and geometry also impacts fit. Those with larger wrists (above 7 1/4") typically prefer the 'long' version. If band is longer than desired, fold excess back into the keeper loop for cleanest look. Full money back guarantee for anyone that does encounter a fit issue. Attaching the Band: Refer to diagram in picture above. First, remove original band and reinsert spring bars into watch head (replacement spring bars sold separately on Amazon if needed). Then, simply feed strap between the spring bar and watch casing, behind watch head and up through the other spring bar. Run through stainless steel ring on short strap to secure watch head. No need to remove spring bars (pins) to swap between different colors.
BUY MULTIPLE: See 'Special Offers' section on this page for seller specific discounts on multi-band purchases. No need to remove spring bars to swap different color combinations in and out. Swap in seconds for a new look daily!
CLEAN DESIGN & PREMIUM STITCHING: Design implements leather loops where others typically use metal. The result is a cleaner look that is less bulky, weighs less and does not get in the way. Premium matched stitching provides the perfect finishing touch for what we believe are the best Leather NATO Style straps anywhere.
TOP GRAIN LEATHER & SELECT HARDWARE: Hand selected top grain leather with 316 stainless steel buckle. Thickness measures approximately 1.4mm, providing excellent durability while still being able to squeeze between the spring bar and watch head of the vast majority of timepieces.
WIDTH SELECTION: Available in 18mm, 20mm, 22mm widths to fit thousands of watch models. To determine proper width for your watch, use a metric ruler to measure the lug width or the width of the current band at the point where it attaches. If your watch has an odd lug width (19mm or 21mm), we recommend going with the strap 1mm larger than measured. The material is soft and should squeeze in without an issue.
LENGTH SELECTION GUIDELINES: 'Standard' length (available in 18mm, 20mm and 22mm widths) measures approximately 10-inches and fits wrists from 5" to 7 1/2" in circumference. 'Long' version (available in 20mm and 22mm widths) measures approximately 11-inches and fits wrists from 6" to 8 1/2". Those with larger wrists (above 7 1/4") typically prefer the 'Long' version.